An efficient manufacturing method for I-shaped cross-sectional CFRP beam with arbitrary arrangement of carbon fiber using electro-activated resin molding

Abstract

The I-shaped cross-sectional beam of CFRP (CFRP I-beam) is usually manufactured by the continuous protrusion method. Carbon fibers can only be arranged in the longitudinal direction. The CFRP I-beam with arbitrary arrangement of carbon fiber was manufactured with applying the electro-activated deposition molding method. The carbon fiber fabric was immersed in the deposition solution and energized, epoxy resin precipitated around carbon fiber and impregnated. The resin-impregnated fabric was installed to the mold, and the CFRP I-beam was fabricated. The CFRP I-beam was subjected to three-point bending tests, and the relationship between load-deflection was simulated by finite-element analysis.     

高韧性环氧沥青及混合料性能影响因素分析

开发了一种新型高韧性环氧沥青,研究了树脂用量、相容剂种类及用量、高温固化复配体系对高韧性环氧沥青及混合料性能的影响。试验结果表明,随着树脂用量增加,高韧性环氧沥青及混合料的性能随之增强,合适的树脂用量为40%;自制的相容剂能有效改善树脂与基质沥青的相容性,其最佳用量为10%;采用高温固化剂与中温固化剂复配体系,当其用量比为9∶1时,高韧性环氧沥青及混合料能获得良好的力学性能,且常温养护7 d即可形成最终强度。高韧性环氧沥青及混合料具有与进口材料同样优异的性能。     

Double Dianhydride Backbone Polyimide Aerogels with Enhanced Thermal Insulation for High‐Temperature Applications

Aerogels owe their high thermal insulation and other unique properties to their nanostructure configuration. However, controlling the aerogels' morphology is always a scientific challenge. In this study, double dianhydride backbone (double backbone) polyimide aerogels with tailored nanostructure assembly are created for the first time. This is achieved by controlled polymerization reaction of oligomers with distinct dianhydride monomers. Combining the two oligomers through a controlled polymerization reaction is a successful strategy for tailoring the aerogels nanostructure assembly as well as other properties. The fabricated double backbone aerogel presents 40% reduced thermal conductivity of 19.7 mW mK^?1 over previously studied polyimide aerogels along with the compression modulus of 1.64 MPa at a relatively low density of 0.068 g cm^?3. Such low thermal conductivity is comparable with the inorganic counterparts. Light in weight and high thermally insulated polyimide aerogels with suitable mechanical properties and high service temperature are an appropriate replacement for current fireproof insulation materials.     

Thermo-adjusted self-healing epoxy resins based on Diels–Alder dynamic chemical reaction

Micro-damage in materials could be repaired by endowing materials with self-healing performance. Herein, an epoxy resin with excellent self-healing performance grounded on thermo-reversible Diels–Alder dynamic chemical reaction was developed. Results showed that the bending strength and adhesive behavior of epoxy resin were influenced dramatically upon treatment with various temperatures. More importantly, damages created in epoxy resin could be repaired completely after suitable heat treatments. What is more, the healed epoxy resin exhibited much higher bending strength and adhesive performance than the pristine one did. The materials could be damaged and then repaired repeatedly. Meanwhile, the as-prepared self-healing epoxy resin exhibited excellent thermal reversibility and controllable adhesion. The thermo-adjusted self-healing performance endowed epoxy resin with recyclable and reusable performance. Therefore, the research made it possible of recycling waste epoxy resins.     

Effect of aluminium acetyl acetonate on the hydrogen and nitrogen permeation of carbon molecular sieves membranes

With a growing interest in hydrogen as energy carrier, the efficient purification of hydrogen from gaseous mixtures is very important. This paper addresses the separation of hydrogen using Carbon Molecular Sieves Membranes (CMSM), which show an attractive combination of high permeability, selectivity and stability. Supported CMSM containing various amounts of aluminium have been prepared from novolac and aluminium acetyl acetonate (Al(acac)₃) as carbon and alumina precursors. The thickness of the CMSM layers depend on the content of Al(acac)₃ in the dipping solution, which also has influence in the pore size and pore size distribution of the membranes. The permeation properties of the membranes against the Al content in the membrane follows a volcano shape, where the membrane containing 4 wt (%) of Al(acac)₃ has the best properties and was stable during 720 h for hydrogen at 150 °C and 6 bar pressure difference. All the CMSM have permeation properties well above the Robeson Upper limit.     

密胺树脂强化“脱硫石膏-玻纤”的成型过程与机制

为了资源化利用烟气脱硫产生的工业废弃物脱硫石膏,以密胺树脂强化的脱硫石膏-纤维复合体系为研究对象,将密胺树脂固化成型条件与石膏的水化成型过程进行匹配与优化,发展出具有优异综合性能的石膏复合板材.结果表明:密胺树脂的固化交联与石膏晶须生长过程的合理匹配与协同,既有助于形成有机-无机紧密结合,同时也有助于加强脱硫石膏晶须与玻璃纤维之间的附着,促进实现密胺树脂对材料性能的强化;石膏复合板的抗折强度不低于18 MPa,抗压强度大于25 MPa,弹性模量大于6500 MPa,24 h吸水率低于3.0%,主要性能超过传统的水泥或硅酸钙类型的基础板材,具有明显的技术及市场开发前景.     

基于蜻蜓翅脉结构的连续碳纤维增强树脂基复合材料仿生设计与增材制造

以具有轻质高强优异性能的蜻蜓翅脉结构为设计灵感，在分析翅脉网格结构抗冲击原理的基础上，设计了传统和仿生两类对比结构。采用熔融挤出3D打印机成功制备了具有不同结构的连续碳纤维增强聚乳酸复合材料试样，并对不同结构复合材料试样的拉伸性能和抗冲击性能进行了测试和对比分析。研究分析结果表明：由于拉伸力方向上的连续碳纤维含量相对较少，限制了仿生结构复合材料抗拉强度的提高，但仿生结构的平均抗拉强度为传统结构的1.18倍；当仿生结构复合材料试样受到冲击力时，其内部六边形结构的连接角度会发生变化，从而极大消耗冲击能量，同时具有六边形网格结构的连续碳纤维可以有效阻碍裂纹的扩展，因此仿生结构的平均冲击韧性可以达到传统结构的2.46倍；仿生蜻蜓翅脉结构可以显著提高增材制造复合材料的综合力学性能，且对于抗冲击性能的提高具体突出效果。连续碳纤维增强树脂基复合材料的有效可行的仿生蜻蜓翅脉结构设计和增材制造，可极大扩展其在高冲击载荷领域中的相应应用。